RTD temperature probe - TEMPERATURE CONTROLLER THAI

RTD TEMPERATURE CONTROLLER

Temperature Controller Thai ศูนย์รวมและจำหน่าย อุปกรณ์ควบคุมอุณหภูมิ (RTD Temperature Controller) สำหรับใช้งานในอุตสาหกรรม

Screw-In RTD Temperature probe with form B terminal Head (902020)

JUMO Etemp B-Screw-In RTD Temperature probe with form B terminal head for standard applications (902023)

Screw-In RTD Temperature probe with form J terminal Head (902030)

For temperatures from -50°C to +400°C
As single or double RTD temperature probes
Available with transmitter
Protecttion type IP65
Application areas include air conditioning and refrigeration technology as well as heating, furnace/kiln, and apparatus engineering

JUMO VIBRO temp - screw - In RTD temperature probe with a plug connector (902040)

For temperature from -50 °C to +270 °C (for the short term up to 300°C)
Vibration-resistant construction
Different plug connectors : log against contact
Protection type IP65
Application areas include air conditioning and refrigeration technology as well as heating, furnace/kiln, and apparatus engineering

Screw-In RTD Temperature probe with connector according to DIN EN 175301 (902040)

For temperature from -50 °C to + 260 °C
Vibration-resistant construction
Plug connector locked against contact, Protection type IP65
Available with transmitter
GL approval for basic types 902044/20 and 902044/21 (max. insertion length 200mm)
Vibration-resistant screw-in RTD temperature probes allow temperatures to be measured under pressure in engines and compressor as well as in plant engineering

Screw-In RTD Temperature probe with connecting cable (902050)

For temperature from 50 °C to + 260 °C
As single or double RTD temperature probes
In two-wire, three-wire, or four-wire circuit
Connecting cable PVC, Silicone, PTFE, Metal braiding
Application ares include air conditioning and refrigeration technology as well as heating furnace/klin, and apparatus engineering.

RTD Temperature probe for device and plants tested according to DIN EN (902006)

For heat conducting system according to DIN 4754
For temperature from -50 °C to + 400 °C
As single, double, or trip RTD temperature probes
For water, oil, or air
For tested control limitation devices
Application areas include air conditioning and refrigeration technology as well as heating, furnace/klin. apparatus engineering

Screw-In Melt RTD Temperature probe (902090)

For temperature from -50 C to + 400 C
Various probe tips available
Protection tube and probe tip in stainless steel
Ceramic insulated probe tip
In the two-wire circuit, three-wire circuit, or four-wire circuit
For application in the plastic industry

Push-In RTD Temperature probe with form B terminal head(902120)

For temperature from -50°C to +600°C
with interchangeable measuring insert
As single or double RTD temperature probe
Terminal head from B, BUZ, BUZH, Bkk
Available with transmitter
Application areas include air conditionuing and refrigeration technology, heating furnace/kiln apparatus engineering, and process technology

JUMO Etemp B-push-In RTD Temperature probe with form B terminal head for standard applications (902123)

For temperature from -50°C to +400°C
with built-in measuring insert
As single or double RTD temperature probes
Terminal head form B or BUZ
Available with transmitter
Mechanical engineering, industrial boiler plants
Boiler construction, Transformer engineering, textile machinery

Push-In RTD Temperature probe with form J terminal head (902130)

For temperature from -50°C to +260°C
Long-term stability
Cost-effective design for solar thermal systems
Connecting cable made of PVC, PUR, silicone, or PTFE
Temperature measurement in accu

Push-In RTD Temperature probe with connecting cable (902150)

For temperature from -50°C to +400°C
As single or double RTD temperature probes
In 2-wire circuit, 3-wire circuit, or 4-wire circuit
Connecting cable PVC, silicone, PTFE, Metal braiding
Among other , the application areas are in the air conditioning and refrigeration industry, in the construction of heating systems/furnaces/equipment, and in labroratory technology

Push-In RTD temperature probe with connecting cable for sola thermal system (902153)

For temperature from -50°C to +260°C
Long-term stability
Cost-effective design for solar thermal systems
Connecting cable made of PVC, PUR, silicone, or PTFE
Temperature measurement in accumulators

Mineral-insulated RTD temperature probes with bare connection wires according to DIN EN60571 (902210)

For temperature from -50°C to +600°C
Flexible sheath cable with vibration -resistant measuring insert
As single or double RTD temperature probe in two-wire, three-wire, or four-wire circuit
Quick response time
Application-specific insertion lenght
Due to their specific features, mineral-insulated RTD temperature probes are usedin chemical plants, power plant, pipeline, engine building, test rigs, and any measuring locations requiring flexiblity and simple replacement

Push-In RTD temperature probe with bayonet connection (902190)

For temperature from -50°C to +400°C
with protection tubes made of various materials
As single or double RTD temperature probes
Good heat transfer through adjustable spring pressure
Installation and removal without tools
Push-in RTD temperature probes with bayonet connection are the prefereed choice for temperature measurement in solid bodies, friction bearings, and tools(e.g. in the plastic processing industry)

Mineral-Insulated RTD temperature RTD temperature probes with LEMO coupling according to DIN EN (902210)

For temperature from -50°(200)C to +600°C
Flexible sheath cable with vibration-resistant measuring insert
As single or double RTD temperature probes in two-wire, three-wire, or four-wire circuit
Quick response time
Application-specific insertion length
Due to their specific features, mineral-insulated RTD temperature probes are used in chemical plant, power plant, pipelines, engine building, test rigs, and any measuring requiring flexiblity and simple replacement

JUMO FOODtemp Insertion RTD Temperature Probe (902350)

For temperature from -50°(200)C to +260°C
Steam-tighht and pressure-resistant
high mechanical strength
Available with multiple measuring points
For use in the food industry
For cooking, boiling, and baking process in all areas of food processing and for presevation
Further application areas are autoclaves and sterilizer

JUMO HEATtemp-Screw-In RTD Temperature probe for heat and cold meter with a terminal head for direct installation, type DL (902424)

For temperature from 0°C to +180°C
Type examination certificate for MID heat meters and domestic approval for cold meters as replacable temperature probes
Fulfill the requirements of DIN EN 1434, AGFW 202, and FW211
PAiring and declaration of conformity in accordance with GErman Weights and Measures Act and according to MID
Production certified according to module D (MID) (CE and metrology identification marking)

JUMO HEATtemp-Screw-In RTD Temperature probe for heat meters with connecting cable fot direct mounting type DS/Dl (902425)

For temperature from 0°C to +180°C
Type examination certificate for MID heat meters and domestic approval for cold meters as replacable temperature probes
Fulfill the requirements of conformity in accordance with German Weights and measure Act and MID
Production certified according to Module D (MID) (CE and metrology identification marking)

Indoor and Outdoor RTD Temrature probe (902520)

For temperature from -50°C to +90°C
For apllication in air confitioning technology
Protection type IP20 to IP65
Connection available in two-wire, three-wire, or four-wire circuits
Available with analog transmitter
Indoor, wall, and outdoor RTD temperature probes for air conditioning technology used for temperature measurement in rooms hall, and outdoors

Channel RTD Temperature Probe (902520)

For temperature from -50°C to +200°C
For use in air-conditioning technology
Protection type IP20 to IP65
Connection available in two-wire, three-wire, or four-wire circuit
Available with analog transmitter
Channel RTD temperature probes for air-conditionin technology are predminantly used for temperature measurement in air channel and outdoors

Surface RTD Temperature Probe with connecting cable (902550)

For temperature from -50°C to +260°C
With protection fittings made from various materials
Simple and quick installation, low thermal mass
Good thermal transfer from the measuring point to the sensor
For temperature measurements on closed pipe systems or on other round eve surfaces
Versions provide with a drilled hole also enable a screw fitting to any surface (e.g. hotplates)

Surface RTD Temperature probes (902550)

For temperature from -50°C to +120°C, for round and flat surfaces
Simple and quick installation, low thermal mass
Circular surface probes for temperature measurements on closed pipe systems or on other round surfaces

Test equipment for temperature and its traceablility/temperature measuring chains (902721)

Precision temperature indicating device
Includes PT100 precision RTD temperature probe
Also available with thermocouple for higher temperatures
USB interface, mains operation possible
Test equipment calibrated by DAkks (DKD-German calibration service)
Measurement result is traceable to national standards

RTD temperature probe for the food and pharmaceutical industry (902810)

For temperature from -50°C to +250°C
Protection type up to IP69 according to DIN EN 60529 (IP69 according to DIN 40050)
EHEDG Certification
Stainless steel protection tubes
Available with two-wire transmitter
CIP Compliant installation

JUMO dTRANS T100-Screw-In RTD Temperature Probe qithout/with Transmitter (902815)

For temperature from -50°C to +250°C
RoHS conformity for EU and China
EHEDG Certification
Configuration with setup program via USB interface
M12 x 1 plug connector protection type IP67 according to DIN EN60529 with inserted machine connector
For versatile measuring take industrial application areas

JUMO PROCESStemp RTD Temperature probe for process technology with Ex approval (902820)

For temperature from -200°C to +600°C
With protection tube os stainless steel, titanium, tantalum, Inconel® and HASTELLOY®
Available with two-wire transmitter (4 to 20 mA/HART®) in Ex version
ll 1/2 G Ex ia IIC T6 .. T1 Ga/Gb¹
ll 1/2 D Ex ia llC T80 … T400 C Da/Db¹
ll 1/2 G Ex ia/d llC T6 … T4 Ga/Gb¹
ll 1/2 D Ex ia/d llC T6 … T1 Ga/Gb¹

ATEX/IEXEx RTD Temperature probe with connecting cable ACC. to DIN EN 60751 (902821)

For temperature from -50°C to +250°C
As single, double, or triple RTD temperature probe in two-wire, or four-wire circuit
Shield connecting cables (Silicone PTFE, Metal braiding/glass fiber, PVC, PUR, FEP, RADOX®.BETAflam®)
Application-specific desiggn types

JUMO STEAMtemp Push-In RTD Temperature Probe in Steam-tight version (902830)

For temperature from -70°C to +200°C
As single, double, or triple RTD temperature probe in two-wire, or four-wire circuit
Connecting cable PTFM, FEP, and silicone
For temperature measurements in apparatus engineering and laboratory engineering

Level and Temperature Probe for Utility vehicles as well as Construction and Agricultural machinery (902880)

For temperature from -70°C to +200°C
As single, double, or triple RTD temperature probe in two-wire, or four-wire circuit
Connecting cable PTFM, FEP, and silicone
For temperature measurements in apparatus engineering and laboratory engineering

JUMO CANtrans TRTD Temperature probe with CANopen output (902910)

For temperature from -50°C to +450°C
As single, double, or triple RTD temperature probes
Vibration-resistant design, limit value monitoring
Setting via customary ANopen software tools applications
Medical technology, Mechanical engineering
Drive technology. Utility vehicles, trains

JUMO Wtrans T-RTD Temperature probe with wireless data transmission (902930)

for stationary and mobile measurements
Measuring range: -30°C to +260°C
Radio frequency: 868.4 MHz or 915 MHz
Also available with ATEX approval
Open air range up to 300 m
Wiring expense are eliminated with modern wireless technology
Fail-safe transmission with telegram coding
Battery status monitoring

JUMO Wtrans Receiver - Universal for JUMO wireless measuring probes (902931)

Universal receiver for JUMO wireless measuring probe
In combination with the corresponding transmitter for RTD temperature probes, thermocouples, resistance/potentiometer, voltage input, or pressure measurement
Wiring expense are eliminated with modern wireless technology for up to 16 transmitters per reciever (can be freely combined)
RS485 interface with Modbus protocol
Up to four analog output/ up to two switching outputs(relay)

JUMOO DELOS T -Electronic Temperature switch with display and analog output (902940)

Universal receiver for JUMO wireless measuring probe
Configuration performed with the rotary encoder temperatures switch or setup program
M12 x 1 plug connector; protection type IP67 according to DIN EN 60529 with inserted machine connector, positively lit LCD display
Applications: Food and pharmacuetical, CIP/SIP systems mechanical and plant engineering, air conditioning and refrigeration applications

JUMOO dTRANS T1000-Temperature with IO-Link (902915)

Small,compact, robust, stainless steel, fully welded
Various process connections, hygienic connections (EHEDGE)
Simple start up, easy sensor replacement
high degree of accuracy, cnnection via IO-link master
LED status display
Also available as a pressure sensor with IO-link